3DJAKE ecoPLA White, 1.75 mm / 1000 g
Allround PLA filament at an unbeatable price in white colour
€ 16,66
(€ 16,66 / kg, All prices excl. VAT. - Excludes delivery costs)
Features & Advantages
- Made in EU
- High quality
- Easy to print
- Minimal warping
- No heating bed required
Item no.: CLF-ECOPLA-WHITE-1000-175, Content: 1.000 g, EAN: 9120043486171
Product information & technical details
- Item no.: CLF-ECOPLA-WHITE-1000-175
- Manufacturer No.: ECOPLA-WHITE-1000-175
- Manufacturer: 3DJAKE
- Content: 1.000 g
- Diameter: 1,75 mm, 2,85 mm
- Product Line: ecoPLA
- Product type: PLA Filaments
- Filament colour: White
- Compatibility: Bambu Lab AMS*
- RAL colour: RAL 9003
- System: Spool
- Net weight: 1000 g, 2300 g, 4000 g, 8000 g
- Recommended processing temperature: 195 - 215 °C
- Recommended heating temperature: 0 - 60 °C
Description
The ecoPLA has been slightly modified to make it perfect for 3D printing.
PLA (polylactic acid) is a non-toxic biodegradable 3D printing material.
3DJake ecoPLA is the cheap & high-quality alternative for many printers.
PLA is one of the most popular 3D printing materials due to its features, good printability and ease of use.
3DJake ecoPLA properties:
- Minimal shrinkage
- Low warping
- Good diameters &circularity tolerance
- Zero unpleasant odours
- Easy to print
- Tougher & less brittle than conventional PLA filaments
3DJake ecoPLA filament can be used with nearly all FDM 3D printers.
All ecoPLA colours are based on the standardized RAL colour system:
EcoPLA white - RAL9003
Dimensions of Filament Spools
Downloads
Product videos:
Questions & Answers about 3DJAKE ecoPLA White
-
I've been trying this in my Bambulab P1S and it overextrudes a fair bit to the point it sometimes starts blobbing. Could you folks help by sharing its' flow ratio at 220°c?
Customer Reviews
40 English reviews written for 3DJAKE ecoPLA White
365 customer reviews in all languages
| 5 stars | | 639 | (75%) |
|---|---|---|---|
| 4 stars | | 112 | (13%) |
| 3 stars | | 33 | (3%) |
| 2 stars | | 25 | (2%) |
| 1 Stars | | 39 | (4%) |
848 reviews
40 customer reviews in English
365 customer reviews in all languages
-
Tobias
21 April 2023
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Excellent Print Quality, Strong Bed Adhesion, Moderate Diameter Precision
Rated with 5 out of 5 stars.
For the relatively low price, this is a great filament for daily use. It prints great at the specified temperatures and has a good adhesion on the PEI and also on satin rough print sheets.
There is enough pigment in this white filament, to create fully opaque parts even with thin (1mm) features.
Considering its affordable price, this filament is an excellent choice for everyday use. It prints seamlessly at the recommended temperatures, demonstrating strong adhesion on both PEI and satin-textured print surfaces.
The white filament boasts ample pigment, allowing for fully opaque parts even with slender (1mm) features.
The only area that could use improvement is the filament's extrusion precision, which would further enhance print outcomes. While the current extrusion is on par with most manufacturers, a tighter ±0.02 mm tolerance would be ideal.Was this rating helpful? (1) (0)
-
Works well enough with the Bambulab P1S after tweaks
Rated with 4 out of 5 stars.
Had to tweak some settings to get this printing well on the high-speed Bambulab P1S. Turning down the flow ratio (to prevent overextrusion) of the "generic PLA" preset helped a lot. It works, if still slightly sloppily. And with the lack of in-supply filament in Bambu's store this filament'll fill the gap nicely enough.
Was this rating helpful? (1) (0)
-
Mike
02 June 2024
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Utterly Useless Landfill Generator
Rated with 1 out of 5 stars.
This stuff is the ideal gift for someone you hate. It is essentially unusable. After a few hundred failed prints & 3 or 4 that were usable (with a lot of sanding & postwork) I have just thrown half a spool of this in the bin. Never again.
lmao it's ur settings bro
Nope. Swap the spool for a spool of esun (which is actually CHEAPER than this junk) and everything prints perfectly. Exact same gcode.
It will not stick to the bed.
It warps. Badly.
If you do get a print to finish, the top surface is unacceptable. Spiky, jagged lumps everywhere. Even layer adhesion is terrible. The few prints that actually completed did so with big holes ripped in the sides that look like the bonnet louvres on a 1920s race car. Same gcode prints perfectly with the esun stuff.
There is no amount of settings adjustment, bed levelling or printer setup that can make this stuff work. It is quite simply a bad, bad product. Avoid it at all costs... Unless you have a smug friend who constantly waffles on about how great his printer is, then get him some of this for xmas and watch his interest in the hobby die.Was this rating helpful? (0) (0)
-
ByteDeluxe
02 August 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Bad bed adhesion but solution
Rated with 4 out of 5 stars.
The first layer is difficult to stick but there is a working solution (ender 3 v2): reduce the speed to 7 mm/s, temperature at 220 and bed temp at 70.
Rest of the print at 20 mm/s, 215 and 60.
Then it prints out nicely without stringing.Was this rating helpful? (8) (0)
-
Awful
Rated with 2 out of 5 stars.
I raved about the black version of this to the extent of recommending it to others, what a mistake!
I bought the white thinking it would be a similar experience, however its been a complete nightmare! It just doesn't stick to the bed. Prusa mk3s and ender 3 pro are both having bed adhesion issues regardless of what print bed type I use. So far setting the first layer nozzle temp @ 230 works but after a while it eventually comes away from the bed. I've tried a raft of other settings on both printers without success. A glue stick seems to help me get a print, however this shouldn't be necessary with PLA.
Other filaments I use from a variety of suppliers print fine.
Won't be buying anymore ecoPLA from 3djake. I can't take the chance of wasting any more money, essentially when other suppliers provide a better product at the same price or less.Was this rating helpful? (8) (3)
I wouldn't consider our standard ecoPLA as a PLA+. Beyond plasticisers and dyes there are no further modifications made to it. If you're interested in a non-standard finish on PLA I would suggest looking at our ecoPLA satin range and our ecoPLA Matte range.