3DLac Spray Adhesive, 400 ml
For perfect adhesion to the printing bed
Features & Advantages
- Suitable for all materials
- Without perfume
- Resistant to elevated temperatures
- Strong fixing agent
Item no.: 3DL-145, Content: 400 ml, EAN: 8411322235803
Product information & technical details
- Item no.: 3DL-145
- Manufacturer No.: 145
- Manufacturer: 3DLac
- Content: 400 ml
- Product type: 3D Printer Accessories
Description
3DLac is a spray adhesive glue for 3D printer build plates. The spray was developed by a Spanish laboratory specifically for FDM processing.
3DLac is without perfume. It is resistant to elevated temperatures and includes a strong fixing agent for improved adhesion to the build plate
Hazard and precautionary statements
Signal word: Danger
Precautionary statements:
- P101 - If medical advice is needed, have product container or label at hand.
- P102 - Keep out of reach of children.
- P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 - Do not spray on an open flame or other ignition source.
- P251 - Do not pierce or burn, even after use.
- P264 - Wash thoroughly with plenty of water after use.
- P280 - Wear protective gloves/protective clothing/eye protection/face protection.
- P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
- P501 - Dispose of contents/container according to proper regulations.
Hazard statements:
- H222 - Extremely flammable aerosol
- H229 - Pressurized container: may burst if heated
- H319 - Causes serious eye irritation
- H336 - May cause drowsiness or dizziness
Questions & Answers about 3DLac Spray Adhesive
Customer Reviews
9 English reviews written for 3DLac Spray Adhesive
178 customer reviews in all languages
| 5 stars | | 314 | (89%) |
|---|---|---|---|
| 4 stars | | 30 | (8%) |
| 3 stars | | 2 | (0%) |
| 2 stars | | 3 | (0%) |
| 1 Stars | | 2 | (0%) |
351 reviews
9 customer reviews in English
178 customer reviews in all languages
-
Marcel
14 August 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. -
Oleg
11 February 2023
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Serious adhesion
Rated with 5 out of 5 stars.
Strong enough to take off chunks of smooth (!!!) glass along with the print.
Just wash it off before printing materials that stick well enough by themselves.
Doesn't leave an imprint on the bottom surface of the printed part.Was this rating helpful? (2) (0)
-
allochi
27 June 2024
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Really good adhesive
Rated with 5 out of 5 stars.
I must say I prefer this over the stick, just one simple spray on the bed and all prints are successful
Was this rating helpful? (0) (0)
-
Alexey
27 June 2024
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Cool stuff
Rated with 5 out of 5 stars.
Really improves adhesion on textured PEI plates and reduces warping (at least with ABS)
Was this rating helpful? (0) (0)
-
John
29 June 2020
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. does what it says on the tin!
Rated with 5 out of 5 stars.
Does work, even at high temps. Good product. I won't order again as the smell is very very strong when you spray it, this is expected so I use it outside. The good is a fine even layer of adhesive, the bad is the chemical smell when you spray it. Over all a fantastic product, I would recommend it!
Was this rating helpful? (1) (1)
Works excellent with ASA directly 6mm aluminum Modix Big60 V2 print bed
Rated with 5 out of 5 stars.
I've been struggling and searching A LOT for a good combination to print ASA successfully in my Modix Big60 V2 printer (with full enclosure).
In the end, to my stupid surprise, just spraying 3DLac on the aluminum and heating up the bed to 80ºC gives the strong sticking effect I needed!
And the hotter you go, the harder it sticks.
I've noticed that from 70ºC it gave a really good on a BuildTak Flex System, but my objects kept bending the spring steel sheet from the magnets :-(
With wide objects (that need a nice long time per layer) you should really keep the fan off (otherwise lots of internal stress and warping).
But the narrower you go (less time per layer), the more fan speed works ok (even up to 90%), which I need to use to make details and overhangs in fast layers come out good.
And the best of all; after cooling down (from approx 45ºC) it just lets go completely (from the shrinkage of the aluminum bed)?!
I found that it works the easiest even without a brim, as the brim kept sticking to the aluminum, even after cooling down. This is because it can easily deform aluminum bed shrinks, while a more solid object will shrink differently than the bed and come loose.
I'm really very satisfied! I just need to make a simple carton box/frame to limit where the spray will reach, so I won't get spray the inside of my machine too much.
Haven't tried yet, but I expect more materials will stick equally good.
Time will tell.
Was this rating helpful? (6) (0)