Glow-in-the-Dark Filament
Phosphorescent filament, which shines at night.
The material is mostly based on PLA or ABS. Thanks to the additional phosphorescent particles, the model lights up at night. But the model has to be exposed first. The material will absorb these rays. The best results are achieved with thick walls. The thicker the walls, the stronger the glow.
-
-
Extrudr PETG Glow in the Dark, 1.75 mm / 800 g
- 100% recyclable
- Diverse area of application
- Heat resistant up to approx. 90 °C
-
Polymaker PolyLite PLA Glow in the Dark - Green, 1,75 mm (1.000 g)
- Glow-in-the-dark effect
- Glows green in the dark
- High toughness
-
eSUN PLA Luminous Blue, 1.75 mm / 1000 g
- Glow-in-the-dark effect
- Easy to print
- Environmentally friendly
-
-
eSUN PLA Luminous Green, 1.75 mm / 1000 g
- Glow-in-the-dark effect
- Easy to print
- Environmentally friendly
-
-
Snapmaker PLA Glow-in-the-Dark Green, 1.75 mm / 1000 g
- Made from fermented cornstarch
- User-friendly & easy to print
- RoHS Compliant
-
AddNorth E-PLA Glow in the Dark, 1.75 mm / 750 g
- Easy to print
- Low processing temperature
- Wide range of colours
-
eSUN eStar PLA Galaxy Black, 1.75 mm / 1000 g
- Glow-in-the-dark effect
- Easy to print
- No heatbed required
-
Nobufil ABSx Glow in the Dark Blue, 1,75 mm / 1000 g
- Made from recycled plastics
- Strong & long-lasting luminosity
- High tensile strength & rigidity
-
SUNLU PLA Glow In The Dark Blue, 1.75 mm / 1000 g
- Glow in the dark effect
- Biodegradable
- High strength & rigidity
-
SUNLU PLA Glow In The Dark Yellow, 1.75 mm / 1000 g
- Glow in the dark effect
- Biodegradable
- High strength & rigidity
-
SUNLU PLA Glow In The Dark Green, 1.75 mm / 1000 g
- Glow in the dark effect
- Biodegradable
- High strength & rigidity
-
Formfutura EasyFil™ PLA Glow in the Dark Green, 1.75mm / 750g
- Easy to print
- Available in many colours
- Almost no warping
-
Nobufil PETG Glow in the Dark Green, 1,75 mm / 1000 g
- Made from recycled plastic waste
- Long-lasting luminosity
- Excellent layer adhesion
-
eSUN Luminous PLA Rainbow, 1.75 mm / 1000 g
- Glow-in-the-dark effect
- Easy to print
- Environmentally friendly
-
-
AzureFilm PLA Glow UV Light Yellow, 1,75 mm / 1000 g
- High strength
- Excellent print quality
- No warping
-
Nobufil PETG Glow in the Dark Blue, 1,75 mm / 1000 g
- Made from recycled plastic waste
- Long-lasting luminosity
- Excellent layer adhesion
-
Polymaker PolyLite Luminous PLA Rainbow, 1,75 mm / 1000 g
- Glowing in the dark
- Easy to print
- High tensile strength & rigidity
-
SUNLU PLA Glow In The Dark Blue, 1.75 mm / 1000 g
- Glow in the dark effect
- Biodegradable
- High strength & rigidity
-
Formfutura EasyFil™ ABS Glow in the Dark Green, 1.75 mm (750 g)
- Higher print temperature than normal ABS
- Excellent stability
- Shock resistant
-
Spectrum PET-G Glow in the Dark Yellow-Green, 1.75 mm / 500 g
- Strong phosphorescence effect
- High aesthetic surface quality
- High strength
All prices excl. VAT.
