PA - Nylon Filaments for 3D Printers
Nylon is a popular synthetic polymer mainly used for industrial applications
Nylon is the heavyweight champion of 3D printing filaments. Compared to most other FIlaments it is unbeatable in the field of strength, flexibility and durability. Nylon is more difficult to process than most filaments. The material should be stored in a dry and cool place.
-
Fiberlogy Nylon PA12 + CF15, 2,85 mm / 2500 g
- Reinforced with carbon fibres
- High tensile strength
- High rigidity
-
eSUN ePA12-CF Natural, 1.75mm / 1000g
- Low moisture absorption
- High strength & toughness
- Temperature resistant
-
Polymaker Nylon CoPA 6/6-6 Black, 1.75 mm (750 g)
- High heat resistance
- Robust material
- High tensile strength
-
Polymaker PolyMide PA6-CF Black, 1.75 mm / 500 g
- Excellent thermal properties
- High mechanical resistance
- Good layer adhesion
-
Polymaker PolyMide PA612-CF Black, 1.75 mm (500 g)
- With carbon fibres
- Based on PA6 & PA12
- Insensitive to moisture
-
Fillamentum Nylon CF15 Carbon, 2.85 mm (600 g)
- High strength
- High thermal resistance
- High chemical resistance
-
Fiberlogy Nylon PA12 Black, 1.75 mm (750 g)
- Temperature resistant
- For technical applications
- Extremely durable
-
-
Polymaker PolyMide PA6-GF Grey, 1.75 mm / 500 g
- Excellent thermal properties
- High mechanical resistance
- Good layer adhesion
-
Fiberlogy Nylon PA12 + GF15 Black, 1.75mm / 500g
- High impact resistance
- Chemical resistance
- Low shrinkage
-
colorFabb PA-CF, 1.75 mm (700 g)
- Special polyamide formula
- Nearly without warping
- Carbon fibre content
-
-
Fiberlogy Nylon PA12 Natural, 1.75 mm (750 g)
- Temperature resistant
- For technical applications
- Extremely durable
-
Polymaker Polymide PA12-CF Black, 1.75 mm / 500 g
- Excellent mechanical properties
- High thermal resistance
- Carbon fibre reinforced
-
Fiberforce NYLFORCE Glass Fibre Natural, 2.85 mm (500 g)
- Reinforced fibreglass
- Abrasive
- For extra strong parts
-
Spectrum Nylon PA6 Low Warp CF15S Black, 1.75mm / 1000g
- Thermally stabilised composite
- With 15% carbon fibres
- High stiffness & tensile strength
-
Fiberlogy Nylon PA12 White, 1.75 mm (750 g)
- Temperature resistant
- For technical applications
- Extremely durable
-
AddNorth Adura X Black, 1.75 mm / 500 g
- Carbon fibre reinforced nylon
- Strong prints for heavy-duty applications
- Excellent surface finish
-
Spectrum Nylon PA6 Natural - Low Warp, 1.75 mm / 500 g
- Very low shrinkage (0.3%)
- High-temperature resistance
- Simple separation of the object from the printing table
-
Fiberlogy Nylon PA12 + GF15 Natural, 1.75 mm (500 g)
- High impact resistance
- Chemical resistance
- Low shrinkage
-
Fiberforce NYLFORCE Glass Fibre Black, 2.85 mm (500 g)
- Glass fibre reinforced
- Abrasive filament
- For particularly strong parts
-
Fillamentum Nylon AF80 Aramid, 1.75 mm (600 g)
- Kevlar reinforced filament
- High wear and strength
- Heat-resistant
-
AddNorth Adura Cold White, 2.85 mm / 500 g
- Low shrinkage
- Extreme toughness
- Excellent layer adhesion
-
Polymaker Nylon CoPA 6/6-6 Clear, 2.85 mm / 750 g
- High heat resistance
- Robust and resistant
- High tensile strength
All prices excl. VAT.
