Fillamentum NonOilen, 1.75 mm (750 g)
Bio-based filament with high strength
€ 33,33
(€ 44,43 / kg, All prices excl. VAT. - Excludes delivery costs)
Features & Advantages
- 100% biodegradable
- From renewable resources
- Food safe
- High strength
- Natural silk look
Item no.: FTM-PLA1NON , Content: 750 g, EAN: 8595632836087
Product information & technical details
- Item no.: FTM-PLA1NON
- Manufacturer No.: PLA1NON
- Manufacturer: Fillamentum
- Content: 750 g
- Diameter: 1,75 mm, 2,85 mm
- Product type: Organically Composed Filaments
- Filament colour: Natural
- Compatibility: Bambu Lab AMS*
- System: Spool
- Net weight: 750 g
- Recommended processing temperature: 175 - 195 °C
- Recommended heating temperature: 0 - 50 ° C
Description
Bio-based filament from renewable resources
NonOlien consists of 100% bio-based polymers and is completely biodegradable. It can be recycled many times before it loses its properties.
Printing NonOlien is as easy as standard PLA, but it composts faster. The filament is characterised by its strength and hardness, is very durable and temperature-resistant up to 110 ° C.
It can also be used for food contact applications and is easy to clean in the dishwasher.
Filament spool dimensions
Downloads
Product videos:
Questions & Answers about Fillamentum NonOilen
Customer Reviews
2 English reviews written for Fillamentum NonOilen
8 customer reviews in all languages
| 5 stars | | 2 | (15%) |
|---|---|---|---|
| 4 stars | | 7 | (53%) |
| 3 stars | | 2 | (15%) |
| 2 stars | | 1 | (7%) |
| 1 Stars | | 1 | (7%) |
13 reviews
2 customer reviews in English
8 customer reviews in all languages
-
Tommy
07 February 2023
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. -
Scruff
29 September 2021
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Very bad warping problems
Rated with 2 out of 5 stars.
Have tried to print two designs on my S5, both have failed after numurous attempts even with advice from manufacturers. Have wasted nearly three rolls with no finished product.
Was this rating helpful? (4) (1)
Interresting Filament
Rated with 4 out of 5 stars.
Not the easiest to print,
I did 45°C on Bed
180°C Nozzle (Plated Copper, on Dragon HF)
with 33°C Chamber and 3dLac on smooth PEI (Voron 2.4)
Had to dial down my volumetric flow -50%-ish because this stuff at 180°C had a low viscosity, But if I print at higher temps I get bad Warping.
The filament itself is semi translucent and had a pearl like texture.
Was this rating helpful? (4) (0)