Antclabs BLTouch Levelling Sensor

Automatic levelling sensor for retrofitting your 3D printer

€ 33,33

(All prices excl. VAT. - Excludes delivery costs)

Content: 1 pc

In stock

Delivery by Thursday, 11 July if you order today by 13:30.

Features & Advantages

  • High precision
  • Works with all surfaces
  • Easy installation
  • Smart functions

Item no.: ANT-BLTOUCH, Content: 1 pc, EAN: n/a

Product information & technical details

Description

The famous BLTouch sensor from ANTCLABS from South Korea! The BLTouch is a 3D printer bed levelling sensor that enables automatic bed levelling on your 3D printer regardless of the printing surface.

BLTouch is an automatic level sensor for 3D printers, with which the inclination of the bed surface can be measured precisely. It can work with all types of print bed surfaces such as glass, blue tape or other materials.

Easy installation

The BL Touch has two wiring groups, one with three and one with two wires. The group of three wires is a standard servo connection and the group of two wires is a switch. The probe is controlled via the servo connection and extended and retracted if necessary. The switch notifies the printer when the probe has touched the bed. Consult the documentation of your switch module to find out where these cables can be connected. The exact function of the individual wires is listed in the manual. When installing on your hotend, make sure that the extended probe reaches under the nozzle, otherwise the probe is unusable! Be sure to test this visually before trying to use the BLTouch.

The BLTouch is connected to the control board of your 3D printer via four pins and has the following functions:

  • Brown & Black: Grounding
  • Red: 5 V
  • Orange: control signal
  • White: Z-min

Note that depending on your 3D printer, a firmware update may be required for the BLTouch to work properly.

Functions

The main functions of BLTouch are the same as with conventional automatic level sensors. BLTouch can, therefore, be used on almost any printer.

BLTouch has a simple structure and high precision thanks to the use of a progressively designed solenoid and Hall sensor. It aims for ease of use and pleasant printing by incorporating many intelligent functions such as self-test, alarm, alarm triggering and touch switch mode, blue LED for the display of the servo signal and Z-Probe (Zmin) tests.

Contents of delivery:

  • 1 x BLTouch (Smart V3.1)
  • 2 x screw & nut & washer
  • 2 x springs for BLTouch assembly
  • 2 x Dupont housing 3Pin
  • 2 x Dupont housing 2pin
  • 3 x Dupont housing 1 pin
  • 10 x Dupont pins
  • 1 x jumper cap

IMPORTANT: With many devices, a suitable Antclabs extension cable is necessary for use. Which extension cable is compatible must be checked directly on the 3D printer.

Accessories
Downloads
Product videos:

BL Touch

Creality Ender 3 V2 Upgrade Tutorial

Questions & Answers about Antclabs BLTouch Levelling Sensor

Receive answers from other customers who purchased this product. Please forward any other order-related questions to our Customer Service Team.

  • Hi . Is this compatible with a cr10 v2 with a 2.5.2 board ?

    1 Answer, last answered on 11 August 2021

  • What cable would i need for a CR-10S Pro V2 ?

    This question has not been answered yet.

  • Will this work with my Creality Ender 3 (not pro/v2 just normal)

    1 Answer, last answered on 29 April 2022

  • Does this contain everything required to fit the BL Touch to an Ender 5 Pro?

    1 Answer, last answered on 12 January 2021

  • will this work with Qidi tech i mate S ?

    1 Answer, last answered on 29 June 2022

  • Is this sensor compatible with the “spare” low temp print head which is supplied with the Qidi X-CF Pro?

    1 Answer, last answered on 12 April 2022

  • Hi I was wondering, I've seen different bin board configurations on the internet, I take it does not come with that. Is it needed? Or will this work without it for an ender 3 pro?

    1 Answer, last answered on 23 September 2020

  • Will this fit ona CR10 V2- the daughter board has a 5 pin connector not two seperate ones like this

    1 Answer, last answered on 01 March 2021

  • HI I am having lots of issues with a vyper strain gauge auto leveler. Can I use this instead? it only has a 4 pin connector how should I connect it?

    This question has not been answered yet.

  • Will this work on a Creality CR-5 PRO? If a Creality CR-5 H Pro have one why not one for CR-5 Pro?

    This question has not been answered yet.

Show all answers

Customer Reviews

16 English reviews written for Antclabs BLTouch Levelling Sensor

90 customer reviews in all languages

4,7 out of 5 stars
5 stars
178 (83%)
4 stars
17 (7%)
3 stars
8 (3%)
2 stars
5 (2%)
1 Stars
6 (2%)

214 reviews
16 customer reviews in English
90 customer reviews in all languages

Related products

  • placeholder
  • placeholder
  • placeholder
  • placeholder

Customers also bought

  • placeholder
  • placeholder
  • placeholder
  • placeholder