E3D Revo Nozzle High Flow HT-Abrasive, 0,4 mm
Wear-resistant nozzle with chrome nitride coating
€ 66,66
(All prices excl. VAT. - Excludes delivery costs)
-
-
-
-
E3D
Revo ObXidian High Flow Nozzle
Wear-resistant nozzle with E3DLC coating
€ 61,66 -
E3D
Revo Nozzle HT
High temperature resistant nozzle with chrome nitride coating
€ 45,83 -
E3D
Revo Nozzle HT-Abrasive
Abrasion-resistant & high-temperature-resistant nozzles with chrome nitride coating
€ 62,49 -
E3D
Revo Nozzle High Flow HT-Abrasive
Wear-resistant nozzle with chrome nitride coating
€ 66,66 -
E3D
Revo DiamondBack nozzle
Abrasion-resistant nozzle with polycrystalline diamond tip for metal & ceramic filled filaments
€ 174,99
Features & Advantages
- Copper/hardened steel nozzle with chromium nitride coating
- With non-stick properties
- Increased volumetric flow rate
- Printing temperatures up to max. 500 °C
Item no.: E3D-RC-NOZZLE-HF-HTA-0400-AS-SPK, Content: 1 pc, EAN: 5061011016430
Product information & technical details
- Item no.: E3D-RC-NOZZLE-HF-HTA-0400-AS-SPK
- Manufacturer No.: RC-NOZZLE-HF-HTA-0400-AS-SPK
- Manufacturer: E3D
- Content: 1 pc
- Product type: Nozzles
- Nozzle shape: Revo RapidChange
- Nozzle Diameter: 0,4 mm, 0,6 mm, 0,8 mm, 1.0 mm, 1.2 mm, 1.4 mm
- Filament Diameter: 1,75 mm
Description
The E3D Revo High Flow HT-Abrasive Nozzles are high-flow, abrasion-resistant nozzles specifically designed for high-temperature applications.
Special material combination
The high-temperature-resistant nozzles are made of a special combination of materials. Similar to the ObXidian nozzles, the nozzle tip of the High Flow HT Abrasive nozzle is made of hardened steel and the rest of the nozzle is made of copper to ensure optimised heat transfer to the heat sink. A chrome nitride coating makes the nozzle abrasion-resistant up to 500 °C and gives it additional corrosion protection and non-stick properties.
Improved internal nozzle geometry
The wear-resistant nozzles have the same form factor as the standard Revo hotends, meaning no changes need to be made to existing brackets and fan ducts!
Improved internal nozzle geometry increases the surface area for improved heat transfer to the filament.
Unit consisting of heatbreak and pre-assembled nozzle
To prevent hot tightening, hotend leaks and the possibility of incorrect assembly, each Revo nozzle consists of a pre-assembled nozzle and heatbreak as a unit.
Easy identification with engraved sizes
An easy-to-read engraving of the individual size on the top of the nozzle makes it easier to identify the nozzles.
Attention: The Revo High Flow HT-Abrasive nozzles are not compatible with V6 Heater Blocks! When changing nozzles, it is possible that the Z offset needs to be adjusted.
Note: The Revo High Flow HT-Abrasive nozzles are compatible with HeaterCores of 40 and 60 watts, but are limited to a maximum temperature of 300 °C. When using one of the E3D Revo High Temp Hotside Kits, the nozzles can also be used at printing temperatures of up to 500 °C:
