3DJAKE Resin Standard Dark Blue, 500 g
For precise and worry-free resin prints
Colour:
Features & Advantages
- For LCD / MSLA printers
- Easy to use
- Good adhesion
- Budget-friendly
Item no.: CLF-RES-STDN-DBL-500, Content: 500 g, EAN: 9010707001362
Product information & technical details
Description
The 3DJake standard resin is suitable for use with LCD / MSLA 3D printers (395 - 405 nm). The resin is easy to print, shrinks very little and adheres well to the printing plate.
Models printed with 3DJake Resin have precise details and rich colours.
Material properties of 3DJake Resin Standard
| Test method | Value | |
|
Specific weight |
ISO 1183 | 1.21g/cc |
|
Viscosity |
ISO 2555 | 180MPa |
|
Tensile strength at break |
ISO 527 | 31MPa |
|
Elongation at break |
ISO 527 | 4% |
|
Tensile modulus (E) |
ISO 527 | 1000MPa |
| Impact resistance | ISO 179 | 17kJ/ m2 |
|
Heat deflection temperature A (1.8Mpa) |
ISO 75 | 37ºC |
| Hardness | ISO868 | 77D |
More information
Shake the bottle well before use and wait until the bubbles disappear.
Hazard and precautionary statements
Signal word: Danger
Precautionary statements:
- P101 - If medical advice is needed, have product container or label at hand.
- P102 - Keep out of reach of children.
- P103 - Read label before use.
- P261 - Avoid breathing dust/fume/gas/mist/vapours/spray.
- P280 - Wear protective gloves/protective clothing/eye protection/face protection.
- P310 - Contact your doctor/poison control centre immediately.
- P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P332+P313 - If skin irritation occurs: Get medical advice/attention.
- P362+P364 - Take off contaminated clothing and wash it before reuse.
- P501 - Dispose of contents/container according to local/national regulations.
Hazard statements:
- H315 - Causes skin irritation
- H317 - May cause an allergic skin reaction
- H318 - Causes serious eye damage.
- H411 - Toxic to aquatic life with long lasting effects
Downloads
Questions & Answers about 3DJAKE Resin Standard Dark Blue
Customer Reviews
English reviews written for 3DJAKE Resin Standard Dark Blue
5,0 out of 5 stars
| 5 stars | | 1 | (100%) |
|---|---|---|---|
| 4 stars | | 0 | (0%) |
| 3 stars | | 0 | (0%) |
| 2 stars | | 0 | (0%) |
| 1 Stars | | 0 | (0%) |
1 review
- No reviews available
