Everglue Primers, 15 ml

Name: Everglue Primers, 15 ml
Brand: Everglue
SKU: BD-650404
Price: 10.41 EUR
Availability: InStock

Primer for better adhesion between material and adhesive

Features & Advantages

Transparent
Based on aliphatic amines in organic solvent
Improves adhesion
Simple application

Item no.: BD-650404, Content: 15 ml, EAN: 4251577110050

Product information & technical details

Item no.: BD-650404
Manufacturer No.: 650404
Manufacturer: Everglue
Content: 15 ml
Product type: 3D Printer Accessories

Description

The transparent primer with a base of aliphatic amines in organic solvent creates a permanent and strong bond between low-energy plastics (e.g. PE, PP, PTFE) and silicone, which is usually a challenge for most adhesives due to their smooth surface and chemical resistance represent. The primer serves as a primer and improves the adhesion between the material and the adhesive, while at the same time delaying the ageing processes in the adhesive joint.

Application:

Clean the desired surface, roughen it with sandpaper if necessary and apply the primer. Allow the surface to dry for a short time.

Technical specification:

Base	Aliphatic amines in organic solvents
Viscosity	~1-2 mPa s at +20 °C
Density	0.74g/ml
Flash point	0°C
Vapour pressure	50 mbar at +25 °C

Hazard and precautionary statements

Signal word: Danger

Precautionary statements:

P101 - If medical advice is needed, have product container or label at hand.
P102 - Keep out of reach of children.
P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
P271 - Use only outdoors or in a well-ventilated area.
P280 - Wear protective gloves/protective clothing/eye protection/face protection.
P331 - Do NOT induce vomiting.
P301+P310 - If swallowed: Contact the nearest poison control centre or doctor immediately.
P405 - Store locked up.
P403+P235 - Store in a well-ventilated place. Keep cool.
P501 - Dispose of contents/container according to local/national regulations.