Phrozen Post-Processing Kit

This kit contains all the important tools you might need in or before the post-processing process.

► Examples for use before printing:

1. Place the silicone mat on your work surface.
2. Put on protective gloves.
3. Gently sand the build plate.
4. Use a plastic scraper to check the resin container for hardened resin.

► Examples of application after printing:

1. Use the metal spatula to remove the printed models from the build plate.
2. Gently brush the printed model to clean it.
3. Remove the support structures with the pliers.
4. Use the funnel and mesh screen to filter the remaining resin.
5. Keep the work area clean with the wipe after printing.

Included:

• 1 x silicone spatula (for checking for hardened resin in the resin container)
• 1 x metal spatula (for removing the printed models from the building board)
• 1 x Pliers (for removing support structures from printed models)
• 1 x sandpaper (for polishing the build plate to improve adhesion)
• 1 x metal mesh screen (for easy filtering of the cured resin)
• 1 x collapsible funnel (for easy resin pouring)
• 1 x brush (for cleaning surfaces after printing is completed)
• 1 x gloves (for protecting hands from resins, alcohol, etc.)
• 1 x silicone mat (for protecting the work surface)
• 1 x Wipe Cloth (for cleaning the work area)