PET / PETG Filaments for 3D printers
Polyethylene terephthalate (PET) is the most widely used plastic in the world.
-
-
-
-
Fiberlogy Easy PET-G Transparent Burgundy, 1.75 mm (850 g)
- Easy to print
- High durability
- Low shrinkage
-
-
-
Fillamentum CPE HG100 Red Hood Transparent, 1.75 mm (750 g)
- High impact resistance
- Thermal resistance
- High tensile strength
-
-
Extrudr PETG Transparent, 1,75 mm (1.100 g)
- 100% recyclable
- Diverse area of application
- Heat resistant up to approx. 90 °C
-
colorFabb nGen Clear, 1,75 mm (750 g)
- Meets high demands
- High heat resistance of up to 85 ° C
- Easy to print
-
Fillamentum CPE HG100 Pink Blush Transparent, 1.75 mm (750 g)
- High impact resistance
- Thermal resistance
- High tensile strength
-
Formfutura HDglass™ See Through Green, 1.75mm / 750g
- Different degrees of transparency
- Elegant look
- High strength & toughness
-
Fiberlogy Refill Easy PET-G Burgundy Transparent, 1.75 mm (850 g)
- Masterspool Refill
- An affordable option
- Very good layer adhesion
-
-
Fillamentum CPE HG100 Neon Pink Transparent, 1.75 mm (750 g)
- High impact resistance
- Thermal resistance
- High tensile strength
-
-
Formfutura EasyFil™ ePETG Clear, 1,75 mm / 1000 g
- High dimensional accuracy & transparency
- Good chemical resistance
- Excellent layer adhesion
-
Fiberlogy Refill Easy PET-G Light Green Transparent, 1.75 mm (850 g)
- Masterspool Refill
- An affordable option
- Very good layer adhesion
-
Formfutura HDglass™ Clear, 1.75mm / 750g
- Different degrees of transparency
- Elegant look
- High strength & toughness
-
Fillamentum CPE HG100 Morning Sun, 1.75 mm (750 g)
- High impact resistance
- Thermal resistance
- High tensile strength
-
Formfutura HDglass™ Pastel Green Stained, 1.75mm / 250g
- Different degrees of transparency
- Elegant look
- High strength & toughness
-
Fillamentum CPE HG100 Neon Yellow Transparent, 2.85 mm (750 g)
- High impact resistance
- Thermal resistance
- High tensile strength
-
Polymaker PolyLite PETG Transparent, 2.85 mm (1.000 g)
- Popular material
- All-round filament
- Easy to print
-
Extrudr PETG Transparent Red, 1.75 mm / 1100 g
- 100% recyclable
- Diverse area of application
- Heat resistant up to approx. 90 °C
All prices excl. VAT.
