PET / PETG Filaments for 3D printers
Polyethylene terephthalate (PET) is the most widely used plastic in the world.
-
Extrudr PETG Neon Orange, 1.75 mm / 1100 g
- 100% recyclable
- Diverse area of application
- Heat resistant up to approx. 90 °C
-
Formfutura ReForm rPET Black, 1.75mm / 1000g
- 100% recycled HDglass™
- Easy to print
- Improved strength, toughness and temperature resistance
-
Extrudr PETG Copper, 1,75 mm / 1100 g
- 100% recyclable
- Diverse area of application
- Heat resistant up to approx. 90 °C
-
Formfutura ReForm rPET Yellow, 1.75mm / 1000g
- 100% recycled HDglass™
- Easy to print
- Improved strength, toughness and temperature resistance
-
-
Extrudr XPETG Matt Black, 1.75 mm / 1000 g
- Recyclable
- Good mechanical properties
- High chemical resistance
-
-
Extrudr PETG Black, 1,75 mm (1.100 g)
- 100% recyclable
- Diverse area of application
- Heat resistant up to approx. 90 °C
-
Extrudr PETG Glow in the Dark, 1.75 mm / 800 g
- 100% recyclable
- Diverse area of application
- Heat resistant up to approx. 90 °C
-
Extrudr PETG Neon Green, 1.75 mm / 1100 g
- 100% recyclable
- Diverse area of application
- Heat resistant up to approx. 90 °C
-
Fiberlogy Easy PET-G Transparent Burgundy, 1.75 mm (850 g)
- Easy to print
- High durability
- Low shrinkage
-
Extrudr PETG Blue, 1,75 mm (1.100 g)
- 100% recyclable
- Diverse area of application
- Heat resistant up to approx. 90 °C
-
-
Extrudr XPETG Matt White, 1.75 mm / 1000 g
- Recyclable
- Mechanical properties
- High chemical resistance
-
Formfutura ReForm rPET Light Green, 1.75mm / 1000g
- 100% recycled HDglass™
- Easy to print
- Improved strength, toughness and temperature resistance
-
-
Extrudr PETG Anthracite, 1,75 mm / 1100 g
- 100% recyclable
- Diverse area of application
- Heat resistant up to approx. 90 °C
-
Fillamentum CPE HG100 Red Hood Transparent, 1.75 mm (750 g)
- High impact resistance
- Thermal resistance
- High tensile strength
-
-
Extrudr PETG Transparent, 1,75 mm (1.100 g)
- 100% recyclable
- Diverse area of application
- Heat resistant up to approx. 90 °C
-
Polymaker PolyMax PETG Black, 1.75 mm (750 g)
- High print quality
- Nano-reinforcement technology
- Better mechanical properties
-
Fillamentum PETG Pink Lollipop Transparent, 1.75 mm (1.000 g)
- High rigidity & strength
- Good flexural strength
- Excellent layer adhesion
-
-
Polymaker PolyLite PETG Dark Blue, 1.75 mm / 1000 g
- Popular material
- All-round filament
- Easy to print
All prices excl. VAT.
