PA - Nylon Filaments for 3D Printers
Nylon is a popular synthetic polymer mainly used for industrial applications
-
Fiberlogy Nylon PA12 + CF15, 2,85 mm / 2500 g
- Reinforced with carbon fibres
- High tensile strength
- High rigidity
-
eSUN ePA12-CF Natural, 1.75mm / 1000g
- Low moisture absorption
- High strength & toughness
- Temperature resistant
-
Polymaker Nylon CoPA 6/6-6 Black, 1.75 mm (750 g)
- High heat resistance
- Robust material
- High tensile strength
-
Polymaker PolyMide PA6-CF Black, 1.75 mm / 500 g
- Excellent thermal properties
- High mechanical resistance
- Good layer adhesion
-
Polymaker PolyMide PA612-CF Black, 1.75 mm (500 g)
- With carbon fibres
- Based on PA6 & PA12
- Insensitive to moisture
-
Fillamentum Nylon CF15 Carbon, 2.85 mm (600 g)
- High strength
- High thermal resistance
- High chemical resistance
-
Fiberlogy Nylon PA12 Black, 1.75 mm (750 g)
- Temperature resistant
- For technical applications
- Extremely durable
-
-
Polymaker PolyMide PA6-GF Grey, 1.75 mm / 500 g
- Excellent thermal properties
- High mechanical resistance
- Good layer adhesion
-
Fiberlogy Nylon PA12 + GF15 Black, 1.75mm / 500g
- High impact resistance
- Chemical resistance
- Low shrinkage
-
colorFabb PA-CF, 1.75 mm (700 g)
- Special polyamide formula
- Nearly without warping
- Carbon fibre content
-
-
Fiberlogy Nylon PA12 Natural, 1.75 mm (750 g)
- Temperature resistant
- For technical applications
- Extremely durable
-
Polymaker Polymide PA12-CF Black, 1.75 mm / 500 g
- Excellent mechanical properties
- High thermal resistance
- Carbon fibre reinforced
-
Fiberforce NYLFORCE Glass Fibre Natural, 2.85 mm (500 g)
- Reinforced fibreglass
- Abrasive
- For extra strong parts
-
Spectrum Nylon PA6 Low Warp CF15S Black, 1.75mm / 1000g
- Thermally stabilised composite
- With 15% carbon fibres
- High stiffness & tensile strength
-
Fiberlogy Nylon PA12 White, 1.75 mm (750 g)
- Temperature resistant
- For technical applications
- Extremely durable
-
AddNorth Adura X Black, 1.75 mm / 500 g
- Carbon fibre reinforced nylon
- Strong prints for heavy-duty applications
- Excellent surface finish
-
Spectrum Nylon PA6 Natural - Low Warp, 1.75 mm / 500 g
- Very low shrinkage (0.3%)
- High-temperature resistance
- Simple separation of the object from the printing table
-
Fiberlogy Nylon PA12 + GF15 Natural, 1.75 mm (500 g)
- High impact resistance
- Chemical resistance
- Low shrinkage
-
Fiberforce NYLFORCE Glass Fibre Black, 2.85 mm (500 g)
- Glass fibre reinforced
- Abrasive filament
- For particularly strong parts
-
Fillamentum Nylon AF80 Aramid, 1.75 mm (600 g)
- Kevlar reinforced filament
- High wear and strength
- Heat-resistant
-
AddNorth Adura Cold White, 2.85 mm / 500 g
- Low shrinkage
- Extreme toughness
- Excellent layer adhesion
-
Polymaker Nylon CoPA 6/6-6 Clear, 2.85 mm / 750 g
- High heat resistance
- Robust and resistant
- High tensile strength
All prices excl. VAT.
