PA - Nylon Filaments for 3D Printers
Nylon is a popular synthetic polymer mainly used for industrial applications
-
Fiberlogy Nylon PA12 + CF15, 2,85 mm / 2500 g
- Reinforced with carbon fibres
- High tensile strength
- High rigidity
-
eSUN ePA12-CF Natural, 1.75mm / 1000g
- Low moisture absorption
- High strength & toughness
- Temperature resistant
-
Polymaker Nylon CoPA 6/6-6 Black, 1.75 mm (750 g)
- High heat resistance
- Robust material
- High tensile strength
-
Polymaker PolyMide PA6-CF Black, 1.75 mm / 500 g
- Excellent thermal properties
- High mechanical resistance
- Good layer adhesion
-
Polymaker PolyMide PA612-CF Black, 1.75 mm (500 g)
- With carbon fibres
- Based on PA6 & PA12
- Insensitive to moisture
-
Fillamentum Nylon CF15 Carbon, 2.85 mm (600 g)
- High strength
- High thermal resistance
- High chemical resistance
-
Fiberlogy Nylon PA12 Black, 1.75 mm (750 g)
- Temperature resistant
- For technical applications
- Extremely durable
-
Fiberlogy Nylon PA12 + GF15 Black, 1.75mm / 500g
- High impact resistance
- Chemical resistance
- Low shrinkage
-
colorFabb PA-CF, 1.75 mm (700 g)
- Special polyamide formula
- Nearly without warping
- Carbon fibre content
-
Polymaker Polymide PA12-CF Black, 1.75 mm / 500 g
- Excellent mechanical properties
- High thermal resistance
- Carbon fibre reinforced
-
Spectrum Nylon PA6 Low Warp CF15S Black, 1.75mm / 1000g
- Thermally stabilised composite
- With 15% carbon fibres
- High stiffness & tensile strength
-
AddNorth Adura X Black, 1.75 mm / 500 g
- Carbon fibre reinforced nylon
- Strong prints for heavy-duty applications
- Excellent surface finish
-
Fiberforce NYLFORCE Glass Fibre Black, 2.85 mm (500 g)
- Glass fibre reinforced
- Abrasive filament
- For particularly strong parts
-
Spectrum PA6 CS20 FR VO, 1.75mm / 750g
- High-temperature resistance (briefly up to 160°C)
- Very good layer adhesion
- Low shrinkage
-
-
Spectrum PA6 CF15, 1.75mm / 750g
- Low moisture absorption
- High mechanical strength
- High-temperature resistance (up to 180 °C for short periods)
-
Fillamentum 0rCA Black, 1,75 mm / 600 g
- Made from recycled nylon PA6
- With 10% recycled carbon fibres
- High strength & rigidity
-
Snapmaker Nylon - Black, 1.75 mm / 1000 g
- Very good mechanical properties
- High abrasion resistance & heat resistance
- Ideal for technical applications
-
Formfutura STYX PA6-GF30 Black, 1,75 mm / 4500 g
- With 30% glass fibres
- High rigidity & compressive strength
- Temperature resistant up to 180 °C
-
AddNorth Adura Black, 1.75 mm / 500 g
- Low shrinkage
- Extreme toughness
- Excellent layer adhesion
-
eSUN ePA-CF Natural, 1.75 mm / 1000 g
- High rigidity & toughness
- High impact resistance
- High abrasion resistance
-
-
eSUN ePAHT-CF Natural, 1.75 mm / 750 g
- High strength & rigidity
- High toughness & impact resistance
- High chemical resistance
-
All prices excl. VAT.
