The post Naish S26 Jet Stabilizers appeared first on Big Winds.

Super maneuverability with minimal drag for max performance.
The Dart 120 is our most reactive, maneuverable, and low-drag stabilizer. Its concept was drawn up to take the Dart 140 a step further: quicker, looser, and faster to achieve the most radical surf foiling potential. The resulting Dart 120 design is effectively a Dart 140 with a decreased area, lowered aspect ratio, and shortened span. And yes, while the Dart 120 is made to rip in the surf, it also excels for advanced wingers and even downwind foilers with a sensitive touch looking to loosen their setups to the max.
Area: 120cm2
Span: 300mm
Aspect Ratio: 7.3

Dart 140 – Lightning fast response with top end speed.

The Dart 140 is our smallest stabiliser and offers all the performance characteristics you’d expect from such a small surface area. Lightning fast response with minimal drag for high speeds, this is the tail of choice for advanced to expert wing, surf, tow and kite foilers in powered conditions.

Recommendations

WING: Rider weight 40kg+ (88lbs+), Advanced/Expert
PRONE/SUP SURF: Rider weight 40kg+ (88lbs+), Advanced/Expert
WAKE: Rider weight 40kg+ (88lbs+), Advanced/Expert
KITE: Rider weight 40kg+ (88lbs+), Advanced

Specifications:

Area: 140cm2
Span: 348mm
Aspect Ratio: 8.7

Speed 180 – Highly efficient.

Designed as the evolution of the HA195 stabiliser, the 180 Speed offers greater efficiency and top end of intermediate through advanced wing, surf and downwind foilers. Its high modulus carbon construction is extra stiff for instant pumping and carving response.

Recommendations

WING: Rider weight 50kg+ (110lbs+), Intermediate/Advanced
PRONE/SUP SURF: Rider weight 50kg+ (110lbs+), Intermediate/Advanced
DOWNWIND: Rider weight 50kg+ (110lbs+), Advanced
WAKE: Rider weight 50kg+ (110lbs+), Advanced
KITE: Rider weight 50kg+ (110lbs+), Intermediate/Advanced

Specifications:

Area: 180cm2
Span: 400mm
Aspect Ratio: 9

Surf 205 – Fast and responsive to unleash your inner shredder.

The 205 Surf is a highly manoeuvrable stabiliser that enables tight and critical turns in the pocket. This design is derived from the low aspect HS212 (chopped HS232) which dedicated surf foilers found to be the ticket for foil surfing. The 205 builds on that with refinements to the foil section, planform and thickness to unlock the most freedom on the wave.

• Derived from the HS212 (chopped 232)
• Developed in conjunction with the new MA foil range
• New section and thinner profile with more camber
• Lower aspect for surfing in the pocket
• Consistent pitch stability

Zippy Acceleration

The foil section is thin but with pronounced camber, decreasing drag while also improving lift, forward projection and acceleration. 

Consistent Pitch

Linear pitch characteristics throughout the full speed range even out front and back foot pressure, minimising lift spikes during acceleration and deceleration on the wave.

Broader Speed Range

A high camber section delivers the perfect blend of lift at low speeds to make getting onto foil easy, yet retains excellent controllability at high speeds.

Specifications:

Area: 205cm2
Span: 344mm
Aspect Ratio: 5.9

Glide 220 – Glide with effortless pumping.

Available in May

The Glide 220 is our stabiliser of choice when seeking the greatest glide and pump over long distances. It caters to intermediate through advanced riders pursuing lightwind winging, downwinding and flatwater pumping.

Recommendations

WING: Rider weight 60kg+ (132lbs+), Intermediate/Advanced
PRONE/SUP SURF: Rider weight 60kg+ (132lbs+), Intermediate/Advanced
DOWNWIND: Rider weight 60kg+ (132lbs+), Intermediate/Advanced
WAKE: Rider weight 60kg+ (132lbs+), Intermediate/Advanced
KITE: Rider weight 60kg+ (132lbs+), Intermediate/Advanced

Specifications:

Area: 220cm2
Span: 462mm
Aspect Ratio: 9.7

Flow 235 – It’s all in the name.

The 235 Flow’s name says it all! It’s smooth and predictable, inspiring your confidence and flow. Building on the much-loved HS232, this stabiliser adds a new section for consistent pitch stability, an increased projected aspect ratio and a refined planform to deliver an easy and free feeling ride. If you enjoy several foiling disciplines and want one stabiliser to cover them all, the Flow 235 is for you.

• Derived from the much-loved HS232 platform
• Developed in conjunction with the new MA foil range
• New section and thinner profile with more camber
• Higher projected aspect ratio for improved glide
• More responsive for pumping
• Consistent pitch stability

Zippy Acceleration

The foil section is thin but with pronounced camber, decreasing drag while also improving lift, forward projection and acceleration.

Consistent Pitch

Linear pitch characteristics throughout the full speed range even out front and back foot pressure, minimising lift spikes during acceleration and deceleration on the wave.

Broader Speed Range

A high camber section delivers the perfect blend of lift at low speeds to make getting onto foil easy, yet retains excellent controllability at high speeds.

Specifications:

Area: 235cm2
Span: 386mm
Aspect Ratio: 6.4

The post Armstrong Stabilizers 2025 appeared first on Big Winds.

Lift’s Glide Series wings maximize efficiency. A smooth, ultra-efficient feel that is very balanced between the feet.

Our Glide Series back wings are used best for maximizing efficiency linking waves while pumping or down-winding. They are also effective for maximizing battery life on the eFoil.

The 25 Glide V2 Back Wing is a shop favorite for pure speed and maximum efficiency. It’s a high-performance wing, great for pumping and fast and loose turning.

While it’s not recommended for the eFoil, the 25 Glide V2 Back Wing is amazing for surfing.

SPECS:

• Surface Area: 25 in2 / 161 cm2
• Fuselage Length: 10.6″

Suggested Front Wing Pairings:

• 60 Surf V2
• 100 Surf V2
• 150 Surf V2
• Our entire High Aspect lineup

The 32 Glide Series V2 Back Wing is sporty and fast. This wing offers less area and lower angle than the larger sized back wings, which equates to increased glide and faster speeds.

SPECS:

• Surface Area: 32 in2 / 206 cm2
• Fuselage Length: 11.2″

Suggested Front Wing Pairings:

• 60 Surf V2
• 100 Surf V2
• 150 Surf V2
• Our entire High Aspect lineup

The 36 Glide is 2023’s gold standard and will give the rider plenty of turning capability without feeling unstable. It offers excellent balance and directional control for a perfect-as-it-gets turn. 

SPECS:

• Surface Area: 36 in² / 232 cm²
• Fuselage Length: 11.4″ / 29 cm

New for 2023, the 46 Glide offers maximum stability and slows down the turning for a more conservative and relaxed ride. It offers excellent balance and directional control for a perfect-as-it-gets turn. 

SPECS:

• Surface Area: 46 in² / 297 cm²
• Fuselage Length: 11.8″ / 30 cm

The post Lift Glide Series Back Wings appeared first on Big Winds.

One of the biggest effects on hydrofoil performance comes from the stabilizers. In a sport that is so diverse in its attributes and styles of riding, you need to have the right product to help you get the maximum performance from your system. Introducing the new V-Series Stabilisers. V represents versatility, and through the modular Fusion system, you are able to custom tailor your ride. Add a V-Series Stabiliser to any of the Cabrinha Fusion foils and get ready for the next step in performance & usability.

The post Cabrinha V-Series Stabilizer 2023 appeared first on Big Winds.

We’re proud to announce our new Carve tail wings.  The Carve wings backs are smaller & shorter stabilizers designed specifically for surfing.  With shorter fuselages than Lift’s Glide and Surf tails, the Carves allows riders to make tighter radius turns—much like a shorter chassis on a vehicle allows for a tighter turning radius. 

The Carves also have an increased angle pitched down which adds slightly more drag than the Glide wings, but more front foot pressure and positive lift off for the front wing. This feel gives more liveliness to the ride in smaller surf and a reliable feel on the front foot when speeding up and pushing through a turn. 

Overall, if you’re looking for high performance back wings that drive through a tight turn, the Carve series is it. The Carves come in two sizes, the 26 and 33. Smaller = more sporty. Larger = more stability with the cost of added drag. 

Back Wing – 20 Carve

The 20 Carve is the smallest back wing in our fleet, which makes surfing feel extremely lively. If you want to slash some aggressive turns and you like the tail feeling extremely light with low drag, this is it.

Back Wing – 26 Carve

Lift Foil’s Carve series tail wings are high performance wings, but specifically for surfing and driving through tight turns. 

The 26 Carve is the sportiest carve wing, ideal for experienced surf foil riders.

Back Wing – 33 Carve

Lift Foil’s Carve series tail wings are high performance wings, but specifically for surfing and driving through tight turns. 

The 33 Carve is our more stable carve wing, for reliable tight turns and mobility—but with added drag versus our 26 Carve.

The post Lift Carve Series Back Wing appeared first on Big Winds.