DIAMANT Polymer dichtol AM Makro, 1.000 ml
Polymer for impregnating leaky components & large pores
Features & Advantages
- Special polymer formulation
- Seals large pores
- High pressure resistance
- Temporary protection from corrosion & for transport
Item no.: DIA-2569, Content: 1.000 ml, EAN: 4262367790093
Product information & technical details
- Item no.: DIA-2569
- Manufacturer No.: 2569
- Manufacturer: DIAMANT Polymer
- Content: 1.000 ml
- Product type: 3D Printer Accessories, Post-processing
Description
dichtol AM Makro is a ready-to-use 1-component impregnation system with a special polymer formulation that reliably impregnates leaking components and seals large pores of 0.1 to 0.5 mm. It exhibits high pressure resistance and provides temporary protection from corrosion or for transport.
Suitable for:
- capillary-active deep impregnation of micropores, hairline cracks and porosities,
- targeted serial impregnation,
- Single impregnation of large components,
Preparation and application:
Before application, the pores to be sealed must be thoroughly cleaned of dirt residues and other undesirable substances.
Here are a few applications for dichtol AM Makro:
► Painting:
Apply four times at 1-minute intervals and keep wet for at least 5 minutes to allow the product to penetrate the pores deeply
►Inject:
Inject dichtol AM Makro into the desired porous space and allow it to act for around 5 minutes; then pour out the excess material;
► Dipping:
Dip the object to be sealed in dichtol AM Makro and remove after aound 5 minutes. Allow excess polymer to drain completely.
The impregnating agent dries completely in a few hours thus enabling the treated components to be used after a short time.
Storage: Store the unopened product in a cool and dry place (+5°C to +30 °C).
Shelf life: 5 years.
Hazard and precautionary statements
Signal word: Danger
Precautionary statements:
- P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P233 - Keep container tightly closed.
- P241 - Use explosion-proof [electrical/ventilating/lighting/…] equipment.
- P241 - Use explosion-proof electrical/ventilating/lighting equipment.
- P261 - Avoid breathing dust/fume/gas/mist/vapours/spray.
- P264 - Wash hands thoroughly after handling.
- P271 - Use only outdoors or in a well-ventilated area.
- P280 - Wear protective gloves/protective clothing/eye protection/face protection.
- P310 - Contact your doctor/poison control centre immediately.
- P312 - Call a POISON CENTRE/doctor if you feel unwell.
- P302+P352 - IF ON SKIN: Wash with plenty of water/soap
- P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P308+P313 - IF exposed or concerned: Get medical advice/ attention.
- P333+P313 - If skin irritation or rash occurs: Get medical advice/attention.
- P370+P378 - In case of fire: Use dry extinguishing power or sand to extinguish.
- P501 - Dispose of contents/container at an industrial incineration plant.
Hazard statements:
- H226 - Flammable liquid and vapour
- H315 - Causes skin irritation
- H318 - Causes serious eye damage.
- H336 - May cause drowsiness or dizziness
