DIAMANT Polymer dichtol AM Makro Spray, 500 ml
Polymer formulation for impregnation of leaky components & large pores
Features & Advantages
- Practical spray can
- Special polymer formulation
- Seals large pores
- High pressure tightness
- Temporary protection from corrosion & during transport
Item no.: DIA-2570, Content: 500 ml, EAN: 4262367790109
Product information & technical details
- Item no.: DIA-2570
- Manufacturer No.: 2570
- Manufacturer: DIAMANT Polymer
- Content: 500 ml
- Product type: 3D Printer Accessories, Post-processing
Description
The dichtol AM Makro Spray is a ready-to-use product with a special polymer formulation that reliably impregnates leaking components and seals large pores of size 0.1 to 0.5 mm. It exhibits high pressure resistance and provides temporary protection from corrosion or during transport.
Suitable for:
- capillary-active deep impregnation of micropores, hairline cracks and porosities,
- targeted serial impregnation,
- single-point impregnation of large components,
Preparation and application:
Before application, the pores to be sealed must be thoroughly cleaned of dirt residues and other undesirable substances.
Apply the dichtol AM Macro Spray four times at 1-minute intervals and keep it moist for at least 5 minutes to allow the product to penetrate the pores deeply. Note that the temperature of the object to be impregnated should not exceed 40°C. The penetration of the polymer cannot be guaranteed at higher temperatures.
The impregnating agent dries completely in a few hours, thus the treated components can be used after a short period of time.
Storage: Store the unopened product in a cool and dry place (+5°C to +20°C).
Shelf life: 5 years.
Hazard and precautionary statements
Signal word: Danger
Precautionary statements:
- P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 - Do not spray on an open flame or other ignition source.
- P233 - Keep container tightly closed.
- P251 - Do not pierce or burn, even after use.
- P261 - Avoid breathing dust/fume/gas/mist/vapours/spray.
- P271 - Use only outdoors or in a well-ventilated area.
- P280 - Wear protective gloves/protective clothing/eye protection/face protection.
- P310 - Contact your doctor/poison control centre immediately.
- P312 - Call a POISON CENTRE/doctor if you feel unwell.
- P304+P340 - IF INHALED: Remove person to fresh air and keep comfortable for breathing.
- P305+P351+P338 - IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
- P308+P313 - IF exposed or concerned: Get medical advice/ attention.
- P501 - Dispose of contents/container at an industrial incineration plant.
Hazard statements:
- H223 - Flammable aerosol
- H229 - Pressurized container: may burst if heated
- H318 - Causes serious eye damage.
- H336 - May cause drowsiness or dizziness
Questions & Answers about DIAMANT Polymer dichtol AM Makro Spray
Customer Reviews
English reviews written for DIAMANT Polymer dichtol AM Makro Spray
1 customer review in all languages
| 5 stars | | 2 | (100%) |
|---|---|---|---|
| 4 stars | | 0 | (0%) |
| 3 stars | | 0 | (0%) |
| 2 stars | | 0 | (0%) |
| 1 Stars | | 0 | (0%) |
2 reviews
We do not have any reviews in English yet, but we do have 1 review available in another language.
- No reviews available
