Everglue Craft Spray Glue, 500 ml
Universal spray adhesive for household crafts
Features & Advantages
- Transparent
- For light to medium-weight materials
- Styrene-butadiene-styrene base
- Variable adjustable spray nozzle
Item no.: BD-650089, Content: 500 ml, EAN: 4251577104448
Product information & technical details
- Item no.: BD-650089
- Manufacturer No.: 650089
- Manufacturer: Everglue
- Content: 500 ml
- Product type: 3D Printer Accessories
Description
This transparent craft glue in the spray bottle is used for the quick and effortless connection of light to medium-weight materials (fabric, paper, cardboard, wood, hardboard, foam, fleece, rubber hair and much more). The spray adhesive is based on styrene-butadiene-styrene (SBS) and was made sprayable using the compressed gas dimethyl ether.
For more precise application, the length of the vertical spray jet can be individually adjusted using the spray head valve. Ideal for creative crafts, DIY projects, puzzles, collages, presentations, fixing posters and posters, etc.
Tip: To ensure that the adhesive is suitable for bonding a specific material, you should carry out a test bonding.
Danger!
► When using spray adhesive to bond polystyrene foam, the adhesive must be applied in thin layers on both sides and thoroughly ventilated to prevent the formation of adhesive nests and thus prevent the foam from decomposing.
► The adhesive is not suitable for soft PVC, leather with a fat content of over 12%, artificial leather or products containing plasticizers.
Application:
Shake the spray can vigorously before use. Make sure the desired surface is clean, grease-free and dry. Spray it very thinly from a distance of 20-30 cm and let it dry for 3-10 minutes. If you lightly touch the adhesive film with your fingers and no threads can be pulled and the adhesive feels dry but still sticky, the best time for contact bonding has been reached. Now you can press the parts to be glued together tightly and firmly.
⇒ Tip: Prime porous, uneven or absorbent surfaces with a very thin layer of adhesive, let it dry for 5 minutes and then continue as described above.
Technical specifications:
| Temperature range | -10°C to +60°C |
| Solids content | 36% |
| Curing time | 3-10 minutes (depending on adhesive application, material and temperature) |
| Final strength | after approx. 48 hours |
Hazard and precautionary statements
Signal word: Danger
Precautionary statements:
- P101 - If medical advice is needed, have product container or label at hand.
- P102 - Keep out of reach of children.
- P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking.
- P211 - Do not spray on an open flame or other ignition source.
- P251 - Do not pierce or burn, even after use.
- P410+P412 - Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122 °F.
Hazard statements:
- H222 - Extremely flammable aerosol
- H229 - Pressurized container: may burst if heated
- H315 - Causes skin irritation
- H319 - Causes serious eye irritation
- H336 - May cause drowsiness or dizziness
- H412 - Harmful to aquatic life with long lasting effects
