Carbon filament for 3D printers
3D printing with carbon filament creates extremely stiff and durable models.
-
Fiberlogy Nylon PA12 + CF15, 2,85 mm / 2500 g
- Reinforced with carbon fibres
- High tensile strength
- High rigidity
-
-
eSUN ePA12-CF Natural, 1.75mm / 1000g
- Low moisture absorption
- High strength & toughness
- Temperature resistant
-
Polymaker PolyMide PA6-CF Black, 1.75 mm / 500 g
- Excellent thermal properties
- High mechanical resistance
- Good layer adhesion
-
Polymaker PolyMide PA612-CF Black, 1.75 mm (500 g)
- With carbon fibres
- Based on PA6 & PA12
- Insensitive to moisture
-
Fillamentum Nylon CF15 Carbon, 2.85 mm (600 g)
- High strength
- High thermal resistance
- High chemical resistance
-
Extrudr Green-TEC PRO Carbon, 1.75 mm / 800 g
- Fibre-reinforced BIO material
- Exceptional mechanical properties
- High thermal resistance up to 165 °C
-
R3D Carbon Black, 1.75 mm / 800 g
- Superior rigidity
- Improved dimensional stability
- High UV resistance
-
Fillamentum CPE CF112 Carbon, 2.85 mm (600 g)
- Long-term stability
- Chemical resistance
- High durability
-
Formfutura CarbonFil™ Black, 1.75 mm / 500 g
- High impact strength
- Unique mix
- Excellent viscoelasticity
-
AddNorth Rigid X Black, 2.85 mm / 500 g
- Carbon fibre reinforced PETG
- Chemical, heat and UV resistance
- Perfect for vehicle parts
-
Fiberlogy PCTG+CF Black, 1,75 mm / 750 g
- With 10% carbon fibre
- Carbon finish
- High rigidity & tensile strength
-
Polymaker PolyLite PLA-CF Black, 1.75 mm / 1000 g
- With PLA properties
- Reinforced with carbon fibres
-
Spectrum Carbon PETG, 1.75mm / 1000g
- Increased stiffness, hardness & tensile strength
- Matt surface
- Low shrinkage
-
eSUN ePLA-CF Green, 1.75 mm / 1000 g
- Reinforced with carbon fibre
- High strength
- Matt surfaces & sandblasted texture
-
eSUN ePLA-CF Black, 1.75 mm / 1000 g
- Reinforced with carbon fibre
- High strength
- Matt surfaces & sandblasted texture
-
eSUN ePLA-CF Red, 1.75 mm / 1000 g
- Reinforced with carbon fibre
- High strength
- Matt surfaces & sandblasted texture
-
colorFabb PA-CF, 1.75 mm (700 g)
- Special polyamide formula
- Nearly without warping
- Carbon fibre content
-
Polymaker Polymide PA12-CF Black, 1.75 mm / 500 g
- Excellent mechanical properties
- High thermal resistance
- Carbon fibre reinforced
-
eSUN ePLA-CF Brown, 1.75 mm / 1000 g
- Reinforced with carbon fibre
- High strength
- Matt surfaces & sandblasted texture
-
Carbon Cleanup Carbo3D PETG15, 1,75 mm / 750 g
- With 15% recycled carbon fibers
- Low CO₂ footprint
- High strength & rigidity
-
Protopasta Carbon Fibre Composite PLA, 1,75 mm / 500 g
- With carbon fibres
- Easy to print
- High rigidity
-
Protopasta Black Carbon Fibre HTPLA, 1,75 mm / 500 g
- With milled carbon fibres
- High rigidity & low flexibility
- Matt black finish with a slight shine
-
AddNorth Adura X Black, 1.75 mm / 500 g
- Carbon fibre reinforced nylon
- Strong prints for heavy-duty applications
- Excellent surface finish
All prices excl. VAT.
