Bambu Lab AMS-Guide

Here you will find an overview of all filaments that are compatible with Bambu Lab AMS.

---

The Bambu Lab AMS is a useful accessory for multi-colour 3D printing. The automatic material system with a drying function includes 4 filament slots for different colours and can be installed in parallel with three other AMS systems to enjoy 16 different colours for printing.

To be able to use Bambu Lab AMS, a few things must be observed or certain requirements must be met:

► AMS only supports filaments with a diameter of 1.75 mm.

► AMS supports a wide range of filaments: PLA, PETG, ABS, ASA, PET, PA, PC, PP, POM, HIPS as well as Bambu Lab PLA-CF, PAHT-CF, PETG-CF.

► The following materials are NOT compatible with AMS: TPE, TPU, PVA, Bambu Lab PET-CF/TPU 95A and filaments from other brands that contain carbon or glass fibres.

After we have established which materials are compatible with AMS and which are not, we move on to the question of what requirements a filament spool must fulfil to be compatible with Bambu Lab AMS. There are two sizes:

► Spool width 50-68 mm

► Spool diameter 197-202 mm

In the table below you will find different brands and their filaments that are compatible with Bambu Lab AMS due to the spool dimensions.

*⇒ Attention: Plastic spools are recommended for use with AMS. Please note that cardboard spools can only be used to a limited extent or are not recommended for AMS. If necessary, you can print a suitable AMS spool adapter to be able to use cardboard spools. The spools marked with * require a special adapter ring. Here you can find a free STL file from Polymaker for printing a spool adapter.

► 3DJAKE Contents [g] Width [mm] Outer Diameter [mm] Material 750 (niceBIO, TPU A95) 55 200 Plastic - Black 1000 (ASA, PCTG) 67 200 Plastic - Black ► add:north
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
500	41	200	Plastic
750	53	200	Plastic
1000	67	200	Plastic
► Azure Film
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
500	50	198	Plastic
650	50	198	Plastic
750	63.4	200	Plastic
1000	63.4	200	Plastic
► colorFabb
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
750/750	55	200	Plastic
► Copper 3D
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
250	52	200	Plastic
500	52	200	Plastic
► Creality Contents [g] Width [mm] Outer Diameter [mm] Material 1000 65 200 Cardboard* ► Elegoo
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
1000	59	200	Cardboard*
► eSUN
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
1000	63	200	Cardboard*
► Extrudr
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
750	55	200	Plastic
800	55	200	Plastic
1000	68	200	Plastic
1100	68	200	Plastic
► Fiberlogy
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
500	50	200	Plastic
850 (New spool)	60	200	Plastic
► Fiberforce
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
500	55	200	Plastic
► Fillamentum
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
500	55	200	Plastic
750	55	200	Plastic
1000	68	200	Plastic
► Formfutura
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
500	40	200	Cardboard*
750	55	200	Cardboard*
Tip: 750 g refill filaments from Formfutura are also compatible with the Bambu Lab AMS system. For printing you will need printable Formfuturas ReFill 2.0 spools. You can find these here. ► Francofil
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
500	55	200	Plastic
750	67	200	Plastic
1000	67	200	Plastic
► GEEETECH
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
1000 (Silk PLA Rainbow/Silk PLA Bronze Rainbow)	60	197	Plastic
► Nexeo
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
500	55	200	Plastic
► Nobufil Contents [g] Width [mm] Outer Diameter [mm] Material 850 68 200 Plastic 1000 68 200 Plastic ► Protopasta Contents [g] Width [mm] Outer Diameter [mm] Material 500 ~55 200 Cardboard** 1000 ~65 200 Cardboard** ** Here you will find useful information about the Protopasta spools and the matching Bambu Lab adapter. ► Polymaker
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
500	65	200	Plastic*
750	50	200	Plastic*
1000	65	200	Plastic*
► R3D
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
800	64.8	200	Plastic
1000	64.8	200	Plastic
► Re-Pet3D
Contents [g]	Breite [mm]	Outer Diameter [mm]	Material
750	55	201	Plastic
► Spectrum
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
500	55	200	Plastic transparent
1000	67	200	Cardboard*
1000	67	200	Plastic transparent
► SUNLU Contents [g] Width [mm] Outer Diameter [mm] Material 1000 61 196 Plastic ► Verbatim
Contents [g]	Width [mm]	Outer Diameter [mm]	Material
500	56	200	Plastic

Tip: Spool sizes not specified are not compatible with Bambu Lab AMS, but you can find their dimensions - if required - on our product pages.