BROZZL All Metal Hot-End Upgrade Kit for the CR-6 SE
Precisely manufactured hotend upgrade for the Creality CR-6 SE 3D printer
€ 40,83 € 58,33 -30%
(All prices excl. VAT. - Excludes delivery costs)
Features & Advantages
- Easy to use
- Quick swap
- Precise manufacturing
- Including a MK8 Plated Copper nozzle
Item no.: SCH-20301040, Content: 1 pc, EAN: 9120099289689
Product information & technical details
- Item no.: SCH-20301040
- Manufacturer No.: 20301040
- Manufacturer: BROZZL
- Content: 1 pc
- Product type: Hot-Ends
- Compatible with 3D Printers : Creality CR-6 SE
- Filament Diameter: 1,75 mm
Description
The BROZZL All-Metal-Hot-End was specially developed for the CR-6 SE by Creality. You can easily print a wide variety of materials up to 300 ° C. Thanks to the all-metal design, you can also print on abrasive materials with ease. There is no PTFE filament guide in the hot end that could be damaged by overheating. The internal hole roughness (≤ Ra0.4) and the precise production tolerances also improve the print quality and enable a safer printing process.
The heat break consists of a titanium alloy, which makes it more resistant to abrasive filaments and ensures excellent thermal insulation between the heater block and the cold end.
No changes to your printer are required to install the BROZZL Hotend Upgrade Kit.
Features:
- Full metal
- High-temperature application (up to 300 ° C)
- Easy to use
- Wide range of materials
- Including MK8 Plated Copper nozzle with 0.4 mm diameter
The hotend does not fit on the Creality Ender 3 V2.
Contents of delivery:
- All-metal hotend including heat break and heater block
- MK8 Plated Copper nozzle 0.4mm diameter
- Silicone sock included
Questions & Answers about All Metal Hot-End Upgrade Kit for the CR-6 SE
-
Does it fit creality3D CR-5 pro high-temp Version?
Customer Reviews
1 English review written for BROZZL All Metal Hot-End Upgrade Kit for the CR-6 SE
2 customer reviews in all languages
| 5 stars | | 4 | (57%) |
|---|---|---|---|
| 4 stars | | 1 | (14%) |
| 3 stars | | 1 | (14%) |
| 2 stars | | 0 | (0%) |
| 1 Stars | | 1 | (14%) |
7 reviews
1 customer review in English
2 customer reviews in all languages
-
Harry
06 August 2022
"Verified Purchase" indicates that the rating was given by customers who actually bought this product from us. However, anyone who has a customer account with us can give a rating. Great hot end but with issue at least on the CR6-SE
Rated with 4 out of 5 stars.
Easy to install, did have an issue though which was a combination of snagging filament and running to low temperature which caused a clog in the heat break so I had to take it apart and unclog the heat break, the nozzle also got a bit clogged up but could not clean it so I just hooked it back up and gave it a test and now is all back up and running again.
The review itself: The issue I found that will mostly likely only apply to the cr6-se, due to the placement of the control board for the hotend you have to hook your temperature sensor and heating cartridge on the left of the heat block but the silicon sock included is designed the same as the ones from the other printers they support so the but outs are incorrect so you will need to cut your own hole for the temperature sensor on the silicon sock.
Other than that I would give this hot end a solid review and better than a microswiss due to me having to return mine due to it just being just Awful in my opinion.Was this rating helpful? (2) (0)
No I don't think so, they do use different hotends.