Snapmaker 40W Laser Modul, Artisan/Ray

Powerful laser module to upgrade desktop laser cutters

€ 707,50 € 891,66 -21%

(All prices excl. VAT. - Excludes delivery costs)

Model type : Artisan/Ray

In stock from August 26

Why is it taking longer?

Why is it taking longer? This item is currently not in stock, but will be back soon. You can still order now - the item will be shipped to you as soon as it is back in stock. Close this note

Delivery estimated by Monday, 02 September

Features & Advantages

  • For Snapmaker 2.0 & Artisan
  • With Air Assist
  • With laser protection shield
  • Overheating protection
  • 450 nm

Item no.: SM-71047, Content: 1 pc, EAN: 6971573440934

Product information & technical details

Description

The powerful 40 W Laser Module by Snapmaker is specially designed as an add-on for Snapmaker 2.0 and Snapmaker Artisan to upgrade them to much more powerful desktop laser cutters.

What is the 40 W module equipped with?

Smart Air Assist incl. Air Assist pump,

Improve the quality of your work with Air Assist:

  • Air is pumped into the Air Assist.
  • Vapours are blown away, preventing charring.
  • The lens is kept clean.
  • Vapours are dissipated through the grid table.

Air Assist can be operated via open-source Luban software. Which means that for pieces where you are both engraving and laser cutting, you do not need to use Air Assist on all layers. In Luban, set Air Assist to activate only when cutting so you don't have to manually turn it on or off for each layer.

Luban also offers an extensive library of ready-to-use templates with various patterns, shapes, fonts and symbols that you can use to creatively complete your inspirations.

Common laser material profiles are also available. You can access recommended, ready-made parameters and start working immediately!

And you can also use the laser material profiles

Built-in quick-change module mechanism,

Auto-focus or focusing lever to focus the laser,

To auto-focus, you can calibrate the focus by entering the material thickness on the touch screen.

Auto-focus

A focus lever can also be used to focus the laser. Release the focus lever and move the tool head down until the focus lever touches the material by adjusting the Z offset on the touchscreen.

Auto focus can also be performed with a focus lever

Thread cross to align the work,

Laser shield,

The laser safety shield, in combination with the machine's housing, reduces the laser hazard class from 4 to 1.

Alignment detection,

Overheating protection.

What can the 40 W Laser Module by Snapmaker do?

Cut 20 mm pine wood in one pass,

Cut 15 mm larch plywood in one pass,

Compatible with:

  • Snapmaker 2.0 Quick Swap Kit
  • Snapmaker 2.0 A350T/A350, A250T/A250, F350/F250
  • Snapmaker Artisan 3-in-1 3D Printer
  • Snapmaker Ray Laser Engraver and Cutter

Included:

  • 1 x 40 W Laser Module
  • 1 x Air Assist pump
  • 1 x air Hose
  • 5 x cotton swabs
  • 1 x cable tie
  • 3 x M4x12 screws
  • 6 x M4x8 screws
  • 1 x lime plywood
  • 1 x calibration card
  • 1 x online tutorial instruction card
  • 1 x protection for the laser lens
  • 1 x conversion cable for the Air Assist pump (only for Snapmaker 2.0)
  • 1 x 40 W Laser Module Power-Boosted Toolhead Cable (only for Snapmaker 2.0)

20 W Laser Module vs. 40 W Laser Module

Laser power 20 W laser module 40 W laser module
Size 92 x 141 x 65 mm 105 x 166 x 75 mm
Weight 0.81 kg 1.26 kg
Power consumption 65 W 125 W
Laser type 450-460 nm semiconductor laser
Max. operating speed Snapmaker 2.0 // Artisan 100 mm/s // 200 mm/s
Max. cutting speed 10 mm/s 20 mm/s
Max. material thickness in one pass 10 mm lime plywood 15 mm lime plywood
Materials supported for laser cutting Lime, pine, plywood, beech, walnut, bamboo, MDF, leather, fabric, canvas, corrugated cardboard, cardboard, plastic, dark acrylic (except blue) Lime, pine, plywood, beech, walnut, bamboo, MDF, leather, fabric, canvas, corrugated cardboard, cardboard, plastic, dark acrylic (except blue), stainless steel (0.1 mm)
Materials supported for engraving Lime, pine, plywood, beech, walnut, bamboo, MDF, painted metal, tinplate, stainless steel, anodised aluminium, dark glass, slate, brick, ceramic, jade, marble, slate, leather, fabric, canvas, corrugated paper, cardboard, plastic, dark acrylic (except blue)
Work surface 400 x 400 mm (Artisan)
320 x 350 mm (A350/A350T/F350)
230 x 250 mm (A250/A250T/F250)
Laser dot 0.08 x 0.1 mm 0.1 x 0.15 mm
Air Assist yes

Questions & Answers about Snapmaker 40W Laser Modul

Receive answers from other customers who purchased this product. Please forward any other order-related questions to our Customer Service Team.

Customer Reviews

English reviews written for Snapmaker 40W Laser Modul

Related products

  • placeholder
  • placeholder
  • placeholder
  • placeholder

Customers also bought

  • placeholder
  • placeholder
  • placeholder
  • placeholder