Magigoo 3D Glue Stick for Metal, 50 ml

WHAT

Magigoo Metal is designed as a professional first-layer adhesive with BASF Ultrafuse® 316L. Magigoo Metal is harmless, non-flammable and approved for use in post-processing stages of BASF Ultrafuse® 316L. Magigoo Metal also enables the parts to be easily removed from the building board.

WHY

BASF Ultrafuse 316L enables solid 316L stainless steel parts to be manufactured using desktop FDM 3D printers and a sintering process. Ultrafuse® 316L filament consists of highly refined metal particles that are embedded in thermoplastic binders. Thus, the metal-polymer composite as a filament is not associated with any of the work and safety risks associated with handling fine metal powders. This enables inexpensive, uncomplicated and safe 3D printing of stainless steel parts. Printed parts with BASF Ultrafuse® 316L are prone to warpage due to the thermoplastic nature of the filament binding materials and the different thermal cooling during FDM printing. Due to the sensitivity of the material, care must be taken when removing parts printed with BASF Ultrafuse® 316L to avoid deformation of the part. Magigoo Metal ensures secure and reliable adhesion when printing and enables easy removal of the printed part by immersing it in water, thereby avoiding possible damage to the part.

HOW

A heated bed temperature of 95 - 105 ° C is recommended for the use of Magigoo Metal with BASF Ultrafuse® 316L. However, printing conditions can vary from printer to printer.

• Shake the bottle well
• Apply to the desired area by pressing the tip on the bed (activate the inner valve) and spread as needed
• Print according to the filament/printer manufacturer's recommendations
• After printing. Immerse the entire build board in water or soak the part with water. After a short time - usually 30 minutes to 2 hours, depending on the size of the part - the part should come loose by itself or be easily removed with a slight twist
• Remove residues - wipe with a damp cloth

Note:

Using this product with filaments other than BASF Ultrafuse 316L can result in over-adhesion and damage to the surface. Follow the instructions in the technical sheet for the best results.